1. Early Mac Program Hacking Tools
2. Early Mac Program Hacking Tool 2017
3. Early Mac Program Hacking Tool Free

Aug 24, 2018  MiUnlockTool is an unofficial tool used to unlock bootloader on Xiaomi devices. This tool is copied from the original windows MiFlashUnlock tool and works the same way. The main feature of this tool is compatibility with linux and mac operating system (and windows too). Gain backdoor access: Similar to hacking passwords, some hackers create programs that search for unprotected pathways into network systems and computers. In the early days of the Internet, many computer systems had limited security, making it possible for a hacker to find a pathway into the system without a username or password. Sn1per is an automated scanner that can automate the process of collecting data for the exploration and penetration testing. In their work sn1per involves such well-known tools like: amap, arachni, amap, cisco-torch, dnsenum, enum4linux, golismero, hydra, metasploit-framework, nbtscan, nmap smtp-user-enum, sqlmap, sslscan, theharvester, w3af, wapiti, whatweb, whois, nikto, wpscan.d during a. Jul 03, 2017  Open the System Preferences window, click the iCloud icon, check Use Back to My Mac, and go through the setup process. When you use another Mac and you’re logged into the same iCloud account, your other Mac will appear under the Shared section of the sidebar in Finder, and you can connect to its screen over the Internet.

1. Content Written By Henry Dalziel, 2020. We’re going to be adding to this page throughout 2020 and making it better and better. This page is a “work in progress” and it will populate dozens of Growth Hacking “Internet Marketing” tools that I’ve used over the years.
2. Aug 23, 2019  HTTrack works as a command-line program, or through a shell for both private (capture) or professional (on-line web mirror) use. With that saying, HTTrack should be preferred and used more by people with advanced programming skills. Getleft Getleft is a free and easy-to-use website grabber.

On the Internet, you may often come across many websites that claim to sell software programs to hack email passwords. Many of these email hacking software will promise to get you an access to any email account with just a click of a button.

However, in reality do such ready-made email hacking software exist and do they really work? Well, before you try any such programs, it can be really worth spending a few minutes reading this interesting article!

Most of us are very curious about a software that can hack email passwords. In this post, I’ll explain every piece of information that you need to know about the so called “email hacking software”.

Does there Exist an Email Hacking Software?

With my experience of over 10 years in the field of ethical hacking and information security, all I can tell you is: There exists no such ready-made software program (as shown and advertised on many websites) that can break into the service provider’s database and hack email passwords. This is really just a myth! This may seem a bit disappointing for many, but this is the fact. However, it is still possible to easily hack email passwords using some of the alternative programs and ways as discussed below:

Working Ways to Hack an Email Password:

Even though it is impossible to hack the database and instantly crack the email password, it is still possible to trick the users so that they giveaway the password by themselves. This can be done using a handful of methods like keylogging, social engineering or phishing. However, the easiest and effective way is by using keyloggers.

A keylogger is a small program that records each and every keystroke a user types on a specific computer’s keyboard. So when you install a keylogger on the computer from where the target person is likely to access his/her email, it is possible to captured the password. Though keyloggers are not designed to hack email passwords, they can still be used to accomplish the job. Here is a list of some of the interesting facts about keylogger:

• EASY OF USE: A keylogger does not require any special skills. Anyone with a basic computer knowledge should be able to use it.

• REMAINS UNDETECTED: A keyloggers will remain undetected after installation and operates in a total stealth mode. So, you need not worry about being caught or traced back.

• REMOTE INSTALLATION: In addition to installation on a location computer, keyloggers also support remote installation. That means, you can also install it even on those computers for which you do not have physical access.

Which Keylogger Program is the Best?

With my experience, I recommend the following one as the best to hack any email:

How Realtime-Spy Works?

After you install Realtime-Spy on the target computer, it will silently run in the background to capture the login details (of any email). The details are uploaded to the Realtime-Spy servers which you can access by logging into your online account from any browser.

What are the Supported Operating Systems?

Realtime-Spy supports Windows XP/Vista/7/8 (32 and 64-bit) and Mac.

What about Mobile Devices?

For cell phones and mobile devices, there is a mobile version of the same program called mSpy which can be downloaded from the following link:

Compatibility: Android, iPhone, iPads and Tablets.

Things You should be Aware of:

The following are some of the things you should be aware of before purchasing/downloading any of the tools and programs:

• Never download any of the free tools on the Internet that claim to hack passwords. While most of them are useless and do not work, some are potentially dangerous as they may have a spyware, adware or trojan hidden inside them.

• Do not trust any of the hacking services that promise you to get the password of any email. Most of them are scam sites waiting to rip of your pockets. In order to make money, some of the online hacking services are also known to have engaged in blackmailing of users who place a hacking request. So, please take care of yourself before you fall into such troubles.

If you need more information on Keyloggers, you can refer my other post: How to Use Keyloggers?

Why can’t there Exist a Ready-Made Software to Instantly Hack Emails?

Before I answer this question, let us look at some of the possible ways by which an email password can be hacked:

1. Brute Force Attack:

Brute force attack refers to trying all possible permutations and combinations of the password until the correct one is found. This is sometimes referred to as a “dictionary attack” which involves successfully trying every word in the list such as a dictionary, so that eventually one among the list goes right. This is a very popular method of cracking the password.

Even though brute force is a very effective method to crack passwords, it is not possible to implement it in the present day scenario. Of course, it used to work in those days of 90s and early 2000s, but not now! This is because, almost every email service provider like Gmail, Yahoo and others have taken measures to effectively combat this type of attack.

You might have experienced this for yourself where in if you enter the wrong password even for just a few times, you will be presented with a CAPTCHA verification system. The captcha system was mainly developed to prevent automated bots, software programs and other scripts from carrying out a brute force attack.

2. Hacking the Database:

One of the other ways to obtain the password is by hacking the target server of the email service provider and gaining access to the database which stores the password. Well, even this is not at all an easy task. With big giants like Gmail, Yahoo and Hotmail spending tons on their security, it is virtually impossible to get into their databases. Even if some one manages to gain access, all they can get is just an encrypted form of the password called “hash”, but not the original password.

The above are the only two ways for which one can design an automated one-click software program. However, as both of these methods are pretty outdated and do not really work, it is impossible for the so called “email hacking software” to get you the password. So, the only working possibility would be to use a keylogger. I hope you finally got the answer to the above question.

The Mission

There has been much controversy on removing the firmware lock on a MBP, MBA, or similar Mac’s. The MBA is a bit more complicated without a specialty tool to interface with a header on the board. We use to have to remove the board, scratch back traces, and solder directly to them which can be seen in EX-1.1. This is just short of replacing the entire chip, which is what we are all trying to avoid right? I also have a project I have been forking on called the iFLRT (Firmware Lock Removal Tool) that can be found HERE. Donate what you can to keep my development process alive, every little red cent helps.

First you need to understand what the firmware lock is and how removing it will affect you. Then maybe you will be able to decide if this procedure is for you. In most cases a MBP has been purchased from a third party who may have stolen it or simply forgotten to remove their iCloud account. In this case the symptoms would be a four digit pin lock when the OS loads. When you try to do a re-install you are met with a lock screen shown in EX-1. This is the result of the Mac being most definitely locked from the cloud. There are two options from this point which are explained below.

EX-1

EX-1.1

NOTE: If you have a 2010 model MBP or earlier all you have to do is change the amount of RAM in your MBP and clear the PRAM. This is all you have to do to get past OS lock. But you will still have a firmware lock as far as I know as in many cases this has happened. There have been occasions where the firmware lock has also been removed but I cannot contest to any exact models. Remember to set the Mac up like new and register the Mac with a new iCloud account to avoid any future lock-downs.

Option A: You can assume that a firmware lock was never set and brute force the firmware lock with a HID device such as a Teensy. This operation can take quite a while because it has to go through 10,000 iterations of possible pass-phrases in the worst case scenario. This will ONLY work if it was set by the iCloud!

Option B: You can assume that a firmware lock was indeed implicated when the MBP was set up and that the brute force method will not work. This can save you time but requires you to have a SPI programmer at hand such as the Bus Pirate or in this case a Raspberry Pi.

In A Nutshell

I won’t waste time on the brute force method as I believe it isn't relevant in most cases. I will focus on the process of flashing the EFI chip that is usually easily accessible by removing the Macs’s back-plate, either by a small 15X2 header, 17X2 header, or the 8 pin SOIC chip itself. You can see an image of the SOIC8 chip in EX-2 and the header in EX-2.1. The process is simple but requires a bit of knowledge in micro controllers. I will use the easiest and cheapest route that I know. The process goes briefly like this:

EX-2

EX-2.1

Step 1 – Buy a SPI programmer such as the Raspberry Pi and a clip to interface with the chip. You can find the Pi on eBay, doesn't matter what model and you can find the Pomona SOIC8 clip there as well, usually with the female-to-female wires included. If you have a MBA then you can contact me about purchasing a clip for the header.

Step 2 - Read the chip three times and verify MD5 check-sum to ensure you have a good backup if things go wrong.

Step 3 – Make a copy of the dump and open it in a hex editor. I use Notepad ++.

Step 4 - Search for “$SVS” in the dump and you should find 2 instances. The first instance is what you will need to clear out making sure to keep the file length the same. It is safe to replace it with an empty value such as “ÿ”. The string including the $SVS should be replaced, you can copy and paste a portion of the string below if needed. each 'ÿ' is 2 bits and 8 bits make a byte So keep that in mind when you replace the string. The file size has to be exactly the same size as the chip or it will return an error.

This is an example of what to replace in a hex editor.

Step 4.1 – Get a clean dump that is not firmware locked from the community making sure you use the correct EMC and processor architecture. Make absolutely sure it is the same size as your original dump which is usually 2, 4, or 8 MB. If you go this route then you will need to replace the serial of the donated dump with your own serial in order to not register over their Mac. You can do this my simply searching for 'override-version' and on that same line there will be an 11 to 12 digit serial number that you will replace with your own. I also have a repository found HERE which you can use to search for your EMC number and I may have a clean dump.

Step 5 – Hook your programmer up to the chip, erase the chip, write the new dump and verify it.

Early Mac Program Hacking Tools

Step 6 – Remove the clip and turn your Mac over to turn it on and test. You will immediately use the hot-keys to get to single user mode to test.

Step 7 – If you do not get to SU mode or the Mac does not boot right you will need to erase the chip and write the old dump back to it. You then can exhaust other options.

Step 7.1 – If you do get to SU mode turn the Mac back off and use the hot-keys to clear the PRAM. This will get rid of the 4 digit lock at OS load. Or you can simply re-install at this point. Remember to register the Mac to a new iCloud account to avoid future lock downs.

NOTE: Here are a few things worth mentioning...

• Make sure your chip is supported in Flashrom which is the program you will be using to talk to the chip.
• You need to make sure the clip makes a solid connection to avoid misreads.
• You need to verify your chips datasheet to correctly identify the pin-out to the SPI programmer.
• The wires connecting the clip to the SPI programmer need not be any longer than 8 cm.
• The battery may need to be connected due to voltage drop in special cases (RARE).
• The power cable should be removed from the Mac during the entire process, up until boot time testing.
• Always make sure to back up your original dump and verify the write.
• Optionally you can wire in resistors between the SPI programmer and the clip on the 3.3v pins.

That is the entire process in a nutshell. Now I will explain how you can do this in as much detail as possible. The first thing that you will need to do is pick up your entire inventory before you begin. After that lay everything out and do some testing. Make sure your chip is supported having the datasheet and any diagrams available. I also suggest after you get the clip connected to all the wires you check for continuity from the clips pins to the end of the F-F wires on each pin.

Down And Dirty

NOTE:Read this guide in its entirety before you attempt to do anything to your Mac; Read it twice if you have to. I would also like to take this time to tell you that I am not responsible for any damages to your personal property or your physical/mental wellness if the guide is used. There is no guarantee, implied or expressed, in this procedure. You are following this guide knowingly and accept that damaging your property may be the outcome. Although I do not for see that being the case as I have tested this method many times. With that being said, let’s get started.

This is the list of things you will need in order to successfully and easily fix your MBP:

• Raspberry Pi (Doesn't matter what version) with power supply and an SD card with Rasbian installed.
• 8 Pin Pomona SOIC clip or my EFI Easy Flash clip.
• 8 Female-to-Female wires.
• Flashrom.
• Your chip's datasheet (To verify the chips pin-out and voltage requirements).

Now, I am going to assume that you at least have some experience in Linux and basic troubleshooting skills. You will run into problems and they are not all going to be the same as everyone else’s problems. So critical thinking is also required although I have not added it to the list. When you have your Raspberry Pi all set up and Raspian is booted up you will need to set it up for the first time. if you have already set it up go to the terminal and type:

sudo raspi-config

While in this configuration screen make sure to turn SPI on under Advanced. You may also turn on SSH if needed.

Then you will need to do an update by typing:

sudo apt-get update

Followed by an upgrade:

sudo apt-get upgrade

Optionally doing a distrobution upgrade:

sudo apt-get dist-upgrade

Now we have to install a few libraries that Flashrom relies on:

Early Mac Program Hacking Tool 2017

sudo apt-get install pciutils

sudo apt-get install libftdi-dev

sudo apt-get install libusb-dev

sudo apt-get install libpci-dev

Then you need to download the latest flashrom version:

sudo git clone https://github.com/stefanct/flashrom.git

It will be downloaded into a folder called 'flashrom' so change directory into the folder:

cd flashrom

And make it:

sudo make

Then install it:

sudo make install

Now we need to modify the blacklist by commenting out the SPI entry if it exists:

Sudo nano /etc/modprobe.d/raspi-blacklist.conf

You will need to put “#” in front of the line that reads blacklist spi-bcm2708 effectively commenting it from the configuration file. If there is nothing in the file don't worry about it, that means SPI is not blacklisted. You can then save by hitting CTL+X, Y, and ENTER. You will then need to hook the wires up to the Pi and to the clip according to the diagrams below and your chip's datasheet. In MOST cases it will be just like what you see below.

The actual pinout for most 25 series chips depicted above is as follows for those of you who need a more definitive answer:

• Pin 1 of the chip (marked with a small dot) which is CS (Chip Select) goes to pin 24 on the Raspberry Pi.
• Pin 2 of the chip which is MISO (Master Oin Slave Out) goes to pin 21 on the Raspberry Pi.
• Pin 3 of the chip which is WP (Write Protect) goes to pin 17 on the Raspberry Pi. (Usually Not Needed)
• Pin 4 of the chip which is GND (Ground) goes to pin 25 on the Raspberry Pi.
• Pin 6 of the chip which is MOSI (Master Out Slave In) goes to pin 19 on the Raspberry Pi.
• Pin 7 of the chip which is HOLD (Hold) goes to pin 17 in the Raspberry Pi. (Usually Not Needed)
• Pin 8 of the chip which is VCC (Positive Supply Voltage) goes to pin 17 on the Raspberry Pi (3.3v)

Connect the wires on the clip to the Raspberry Pi making sure it is turned off following the diagram above. The GPIO pin that is closest to the corner of the Raspberry Pi is pin 2, keep that in mind or read the manual. After you are all connected you will place the clip on the chip snugly and turn the Pi on. Go to your working directory and run the following commands using some discretion.

**Start of the Flashrom process**

Get to the help page:

sudo flashrom --help

List the supported chips:

sudo flashrom –L

Read the flash chip by using the below command three times:

sudo flashrom –r ~/efi/read1.bin -V -p linux_spi:dev=/dev/spidev0.0

Erase the chip after you have verified all three reads have a matching MD5 hash:

sudo flashrom -E -V -p linux_spi:dev=/dev/spidev0.0

Using the methods explained above either modify or get a clean dump making sure it is the same size as the original ROM and write it to the chip:

sudo flashrom -w ~/efi/new.bin -V -p linux_spi:dev=/dev/spidev0.0

Verify the chips contents with the file that you just wrote to ensure its integrity:

sudo flashrom -v ~/efi/bnew.bin -V -p linux_spi:dev=/dev/spidev0.0

If you have not run into any problems you will have a freshly flashed chip. If you did run into issue, use the forum here to start a thread and we will help you troubleshoot your error messages. The reason I always use the –V command is to ensure a verbose output. At this point shut your Pi down and then remove the clip. You will then replace your power supply to the Mac and then turn it on using hot-keys to try and get to SU mode. If you get to SU mode you will shut back down and use the hot-keys to clear PRAM and reinstall setting the Mac up as a new machine. Make sure to register it with a newly created or existing iCloud account to prevent further incidents. If you did not get to SU mode you will need to erase your chip and try again.

Early Mac Program Hacking Tool Free

That’s it folks, this is the long awaited guide that has more than enough information to get you through the process. It is specifically designed to save you money in the recovery of your Mac and to seamlessly work through any prior issues you may have had using Flashrom with a windows PC. If this guide has helped you please think about the years of work I have spent making this possible for you and donate to my iFLRT project to make it even easier for others. Or you can donate to me by using the slider on the edge of the left hand side of the page to donate to my personal PayPal account. Good luck to you all and Happy Hunting…