Hack Wpa2 Mac

 admin

Jun 12, 2020  Hacking WPA/WPA2 passwords with Aircrack-ng: dictionary attack, cooperation with Hashcat, maskprocessor, statsprocessor, John the Ripper, Crunch, hacking in Windows Successfully captured handshake can be hacked by various programs. If you manage to configure proprietary video card drivers, then, of course, it is recommended using Hashcat to brute-force passwords. The speed of. If you are looking to learn Wi-Fi password hacking, this newly discovered flaw in WPA/WPA2 protocol will surely help you out. Wifi password hacking has become popular as people are always in search of the free internet. But due to the advancement of technology, hacking wifi, and cracking passwords have become a difficult task to do.

by hash3liZer . 10 August 2018

Lately, a new pattern is discovered in WPA/WPA2 protocols to crack the WPA key passphrase which uses an alternative key to that of 4-way handshake. This new attack uses an identifier key named PMKID in place of MIC which is supplied in the first packet of 4-way handshake. So, this new technique made the WPA cracking more effective and easier than ever before.

The 4-way handshake is in itself dependent on it's 4 frames to compute the hashed key. So, in order to crack the WPA/WPA2 key, we require a complete WPA handshake to crack the password. But with this vulnerability discovered by Jen Steube we are no longer dependent on deauthentication frames, clients etc. Now, we are better able to crack the key by initiating an authentication process with the access point. Let's see.

Here's how the Pairwise Master Key ID (PMKID) is computed. Basically, it's the concatenation of PMK key, PMK secret key, MAC of AP and MAC of STA.

While in this case, the computing process is rather simple. The former method of cracking requires a valid handshake, comprised of at least the first two EAPOL messages to compute the MIC code which then has to be matched at second or fourth frame (relatively different concepts). Here's the python version of the previous method:

Prerequisities

Let's make it up. You would need a Kali Machine and wireless Card that supports packet injection and monitor mode. Tested with Alpha from TP-Link, worked fine. A vulnerable WPA2 router. Here's a picture of EAPOL from a vulnerable router:

STEP 1

Setup environment.

Hack wpa2 password mac

Put your wireless card in monitor mode:

Next thing is, we need some tools from github. The list is:

  • hashcat >= 4.2.0
  • hcxtools
  • hcxdumptool

Installation:

Update the environment first and install the dependencies:

If you are on Kali, hastcat would already be in repository packages. You would need to first uninstall it and then install the latest version from github:

Then make sure, you have the version >= 4.2.0 by using the command:

Now, clone hcxtools from github and compile the binaries:

Then at last, clone hcxdumptool and compile the binaries:

STEP 2

Get the PMKID

This step is about collecting the PMKID. Compile a list of your targets. Scan your area with airodump:

Now, create a list of your targets by writing the MAC address of target to a file:

Then start hcxdumptool:

This will try to make the AP transmit the first EAPOL frame which then will be used to acquire the PMKID from the RSN element layer. Just keep it running until you get the message that PMKID is captured. Here's what it would look like:

STEP 3

Get the PMKID hash

As of now, we have the captured file. Now, we need to extract the PMKID hash from the capturefile.cap. Use hcxpcaptool for this:

Output:

Now, check the added hashes:

STEP 4

Wpa2

Crack the Code

We have the PMKID hash. All we need now is to crack it down using hashcat. Now, run the hashcat with the following syntax:

This would start cracking the password. A successful attack would go like this:

Conclusion

WPA key passphrase can be cracked using PMKID which is located in the first packet of 4-way handshake. The first packet of 4-way handshake is basically sent by the WiFi or Access Point which contains some random keys to encrypt data and also contains the required PMKID key. A user just have to initiate a connection with the Access Point which in turn will sent the first EAPOL message to the client and the client just have to sniff that and start the cracking process.

Preparing to Hack Wi-Fi

  1. Understand when you can legally hack Wi-Fi. In most regions, the only time you can hack a WPA or WPA2 network is when the network either belongs to you or belongs to someone who has given you explicit consent to hack the network.
    • Hacking networks that don’t meet the above criteria isillegal, and may constitute a federal crime.
  2. Download the Kali Linux disk image. Kali Linux is the preferred tool for hacking WPA and WPA2. You can download the Kali Linux installation image (ISO) by doing the following:
    • Go to https://www.kali.org/downloads/ in your computer’s web browser.
    • Click HTTP next to the version of Kali you want to use.
    • Wait for the file to finish downloading.
  3. Attach a flash drive to your computer. You’ll need to use a flash drive with at least 4 gigabytes of space for this process.
  4. Make your flash drive bootable. This is necessary in order to be able to use the USB flash drive as an installation location.
    • You can also use a Mac for this step.
  5. Place the Kali Linux ISO file on the flash drive. Open the flash drive, then drag the downloaded Kali Linux ISO file into the flash drive’s window.
    • Make sure you leave your USB flash drive plugged in after you finish this process.
  6. Install Kali Linux. To install Kali Linux on your computer, do the following:
    • Prompt your Windows computer to restart.
    • Enter the BIOS menu.
    • Set your computer to start from your USB drive by finding the “Boot Options” (or similar) section, selecting your USB drive’s name, and moving it to the top of the list.
    • Save and exit, then wait for the Kali Linux installation window to appear (you may have to restart your computer one more time).
    • Follow the Kali Linux installation prompts.
  7. Buy a Wi-Fi card that supports monitoring. You can find Wi-Fi cards online or in tech department stores. Make sure that your Wi-Fi card allows monitoring (RFMON), or you won’t be able to hack a network.
    • Many computers have built-in RFMON Wi-Fi cards, so you might want to try the first four steps of the next part before buying one.
    • If you’re using Kali Linux in a virtual machine, you will need a Wi-Fi card regardless of your computer’s card.
  8. Log into your Kali Linux computer as root. Enter your root username and password when logging in.
    • You will need to be on your root account at all times during the hacking process.
  9. Plug your Wi-Fi card into your Kali Linux computer. Doing so will immediately prompt the card to begin setting up and downloading drivers for itself; if prompted, follow the on-screen instructions to complete the setup. Once you’re done with this step, you can proceed with hacking your selected network.
    • If you’ve already set up the card on your computer before, you’ll still have to set it up for Kali Linux here by plugging it in.
    • In most cases, simply attaching the card to your computer will be enough to set it up.

Part2 Hacking Wi-Fi

  1. Open your Kali Linux computer’s Terminal. Find and click the Terminal app icon, which resembles a black box with a white “>_” on it.
    • You can also just press Alt+Ctrl+T to open the Terminal.
  2. Enter the Aircrack-ng installation command. Type in the following command, then press ↵ Enter: sudoapt-get installaircrack-ng
  3. Enter your password when prompted. Type in the password you use to log into your computer, then press ↵ Enter. This enables root access for any other commands executed in Terminal.
    • If you open another Terminal window (as you may later in this article), you may have to run a command with the sudo prefix and/or enter your password again.
  4. Install Aircrack-ng. Press Y when prompted, then wait for the program to finish installing.
  5. Turn on airmon-ng. Type in the following command, then press ↵ Enter. airmon-ng
  6. Find the monitor name. You’ll find this in the “Interface” column.
    • If you’re hacking your own network, it will usually be named “wlan0”.
    • If you don’t see a monitor name, your Wi-Fi card doesn’t support monitoring.
  7. Begin monitoring the network. You can do so by typing in the following command and pressing ↵ Enter: airmon-ng start wlan0
    • Make sure you replace “wlan0” with the name of your target network if it’s different.
  8. Enable a monitor mode interface. Enter the following command: iwconfig
  9. Kill any processes that return errors. In some cases, your Wi-Fi card will conflict with running services on your computer. You can kill these processes by entering the following command: airmon-ng check kill
  10. Review the monitor interface name. In most cases, the name will be something like “mon0” or “wlan0mon”.
  11. Tell your computer to listen to nearby routers. To get a list of all routers in range, enter the following command: airodump-ng mon0
    • Make sure you replace “mon0” with whatever your monitor interface name was in the last step.
  12. Find the router you want to hack. At the end of each string of text, you’ll see a name; find the one belonging to the network you want to hack into.
  13. Make sure the router is using WPA or WPA2 security. If you see “WPA” or “WPA2” immediately to the left of the network’s name, you can proceed; otherwise, you cannot hack the network.
  14. Note the MAC address and channel number of the router. These pieces of information are to the left of the network’s name:
    • MAC address — This is the line of numbers on the far-left side of your router’s line.
    • Channel — This is the number (e.g., 0, 1, 2, etc.) directly to the left of the WPA or WPA2 tag.
  15. Monitor your selected network for a handshake. A “handshake” occurs when an item connects to a network (e.g., when your computer connects to a router). Enter the following code, making sure to replace the necessary components of the command with your network’s information: airodump-ng -c channel —bssid MAC -w /root/Desktop/ mon0
    • Replace “channel” with the channel number you found in the last step.
    • Replace “MAC” with the MAC address you found in the last step.
    • Remember to replace “mon0” with whatever your interface name was.
    • Here’s an example address: airodump-ng -c 3 —bssid 1C:1C:1E:C1:AB:C1 -w /root/Desktop/ wlan0mon
  16. Wait for a handshake to appear. Once you see a line with the tag “WPA handshake:” followed by a MAC address in the upper-right corner of the screen, you can proceed.
    • If you’re not in a waiting mood, you can force a handshake using a deauthattackbefore continuing with this part.
  17. Exit airodump-ng, then open the desktop. Press Ctrl+C to quit, then make sure you can see the “.cap” file on your computer’s desktop.
  18. Rename your “.cap” file. While not strictly necessary, this will make it easier to work with later. Enter the following command to change the name, making sure to replace “name” with whatever you want to name the file: mv ./-01.cap name.cap
    • If your “.cap” file isn’t named “-01.cap”, replace “-01.cap” with whatever your “.cap” file’s name is.
  19. Convert the “.cap” file into “.hccapx” format. You can do this by using Kali Linux’s converter. Enter the following command, making sure to replace “name” with your file’s name: cap2hccapx.bin name.cap name.hccapx
    • You can also go to https://hashcat.net/cap2hccapx/ and upload the “.cap” file to the converter by clicking Choose File and selecting your file. Once the file is uploaded, click Convert to convert it and then download it back onto your desktop before proceeding.
  20. Install naive-hashcat. This is the service you’ll use to crack the password. Enter the following commands in order: sudogit clone https://github.com/brannondorsey/naive-hashcat cd naive-hashcat curl -L -o dicts/rockyou.txt https://github.com/brannondorsey/naive-hashcat/releases/download/data/rockyou.txt
    • If your computer doesn’t have a GPU, you’ll need to use aircrack-ng instead.
  21. Run naive-hashcat. Once it finishes installing, enter the following command (making sure to replace any instance of “name” with your “.cap” file’s name): HASH_FILE=name.hccapx POT_FILE=name.pot HASH_TYPE=2500 ./naive-hashcat.sh
  22. Wait for the network password to be cracked. Once the password is cracked, its string will be added to the “name.pot” file found in the “naive-hashcat” directory; the word or phrase after the last colon in the string is the password.
    • It can take anywhere from a few hours to a few months for the password to be cracked.

Part 3 Using Aircrack-Ng for Non-GPU Computers

Hack Wpa2 Mac
  1. Download a dictionary file. The most commonly used dictionary file is “Rock You”. You can download it by entering the following command: curl -L -o rockyou.txt https://github.com/brannondorsey/naive-hashcat/releases/download/data/rockyou.txt
    • Keep in mind that aircrack-ng will not be able to crack the WPA or WPA2 password if the password isn’t in the word list.
  2. Tell aircrack-ng to begin cracking the password. Enter the following command, making sure to use the necessary network information when doing so: aircrack-ng -a2 -b MAC -w rockyou.txt name.cap
    • If you’re cracking a WPA network instead of a WPA2 network, replace “-a2” with -a.
    • Replace “MAC” with the MAC address you found in the last section.
    • Replace “name” with your “.cap” file’s name.
  3. Wait for Terminal to display the results. When you see a “KEY FOUND!” heading appear, aircrack-ng has found the password. You’ll see the password displayed in brackets to the right of the “KEY FOUND!” heading.

Part 4 Using Deauth Attacks to Force a Handshake

  1. Understand what a deauth attack does.Deauth attacks send malicious deauthentication packets to the router you’re trying to break into, causing the Internet to disconnect and ask the Internet user to log back in. Once the user logs back in, you will be provided with a handshake.
  2. Monitor your network. Enter the following command, making sure to enter your network’s information where necessary: airodump-ng -c channel —bssid MAC
    • For example: airodump-ng -c 1 —bssid 9C:5C:8E:C9:AB:C0
  3. Wait for something to connect to the network. Once you see two MAC addresses appear next to each other (and a string of text that includes a manufacturer name next to them), you can proceed.
    • This indicates that a client (e.g., a computer) is now connected to the network.
  4. Open a new Terminal window. You can just press Alt+Ctrl+T to do this. Make sure airodump-ng is still running in the background Terminal window.
  5. Send the deauth packets. Enter the following command, making sure to substitute your network’s information: aireplay-ng -0 2 -a MAC1 -c MAC2 mon0
    • The “2” refers to the number of packets to send. You can increase or decrease this number, but keep in mind that sending more than two packets can cause a noticeable security breach.
    • Replace “MAC1” with the left-most MAC address at the bottom of the background Terminal window.
    • Replace “MAC2” with the right-most MAC address at the bottom of the background Terminal window.
    • Remember to replace “mon0” with your interface name that you found when your computer initially looked for routers.
    • An example command looks like this: aireplay-ng -0 3 -a 9C:5C:8E:C9:AB:C0 -c 64:BC:0C:48:97:F7 mon0
  6. Re-open the original Terminal window. Go back to the background Terminal window when you’re done sending the deauth packets.
  7. Look for a handshake. Once you see the “WPA handshake:” tag and the address next to it, you can proceed with hacking your network.

Hack Wpa2 Mac Terminal

Source: WikiHow

Hack Wpa2 Macos

5/5(4votes )